Wiper example sentences

"Wiper" Example Sentences

1. I need to replace my wiper blades before the rainy season starts.
2. The windshield wiper on the driver's side is not working properly.
3. The wiper motor needs to be replaced.
4. The wiper fluid is empty, I need to refill it.
5. I can't see anything because the wiper is not wiping the windshield.
6. You need to turn on the wipers to clear the rain off the windshield.
7. The wiper arm is loose and needs to be tightened.
8. The wiper assembly is making a strange noise.
9. There's a crack in the wiper blade and it needs to be replaced.
10. The wiper speed can be adjusted by turning the knob.
11. You should always clean your wiper blades to make them last longer.
12. The rubber on the wiper blade is starting to peel off.
13. The wiper system is an important safety feature of the car.
14. You can tell when it's time to change the wiper blades when they start leaving streaks.
15. The driver's side wiper is longer than the passenger's side wiper.
16. The wiper fluid should be changed at least once a year.
17. The wiper arms need to be lifted up to change the blades.
18. The wiper blade is scratching the windshield and needs to be replaced.
19. The wiper fuse may have blown and needs to be checked.
20. The wiper switch is located on the dashboard.
21. The wiper blades come in different sizes and shapes.
22. You should always check the wiper blades before going on a long road trip.
23. The wiper arm can be adjusted to ensure it's in the correct position.
24. The wiper fluid reservoir is located under the hood.
25. The wiper motor is responsible for moving the wiper blades back and forth.
26. The wiper blade needs to be removed to be replaced.
27. The wiper blades should be angled correctly to ensure optimal performance.
28. You may need to replace the entire wiper assembly if it's not working correctly.
29. The wiper arms should be wiped clean regularly to prevent rust.
30. The wiper system should be tested regularly to ensure it's working correctly.

Common Phases

1. Clean the wiper blade;
2. Replace the wiper blade;
3. Adjust the wiper arm;
4. Check the wiper motor;
5. Lubricate the wiper linkage;
6. Fix the wiper spray nozzle;
7. Test the wiper operation;
8. Clean the wiper reservoir;
9. Remove the wiper assembly;
10. Install the wiper refills.