Wrench example sentences

"Wrench" Example Sentences

1. The mechanic used a wrench to tighten the bolts.
2. He accidentally dropped the wrench into the engine compartment.
3. She used a wrench to fix the leaky faucet.
4. The construction worker used a large wrench to tighten the bolts on the steel beams.
5. The plumber carried a variety of wrenches in his toolbox.
6. He had to use a wrench to remove the stubborn nut.
7. The car owner used a wrench to change the flat tire.
8. The rusty old wrench was difficult to turn.
9. She used a monkey wrench to loosen the tight bolts.
10. He had to use a specialized wrench to fix the industrial machinery.
11. The bike rider carried a small wrench in case of any problems.
12. The young child pretended to fix the toy with a plastic wrench.
13. It took several turns with the wrench to loosen the rusted bolt.
14. She had to use a socket wrench to remove the spark plug.
15. The maintenance worker used a crescent wrench to tighten the valve.
16. The ratchet wrench made the job much easier.
17. He was able to fix the leaking pipe with just a pipe wrench and some tape.
18. The assembly line worker used a torque wrench to ensure consistency in the parts.
19. She had to use a pipe wrench to loosen the rusted fitting.
20. The DIY enthusiast loved to collect different types of wrenches.
21. The appliance repairman used a specialized wrench to fix the refrigerator compressor.
22. The gas fitter used a flare nut wrench to connect the gas line.
23. He forgot to bring his wrench and had to borrow one from his neighbor.
24. The farmer had to use a large wrench to fix the broken irrigation equipment.
25. The warehouse worker used a strap wrench to open the stuck container.
26. She tightened the bicycle pedals using an Allen wrench.
27. The aviation mechanic used a torque multiplier wrench to work on the jet engine.
28. He threw the old, worn-out wrench in the junk pile.
29. The electrician used a wire nut wrench to connect the wires.
30. She used a plumber's wrench to tighten the sink drain.

Common Phases

1. Tighten the bolt with a wrench;
2. Loosen the nut using a wrench;
3. Use a pipe wrench to grip the pipe tightly;
4. Adjust the size of the wrench to fit the bolt;
5. Apply force with the wrench to turn the screw;
6. Don't forget to clean and oil your wrench after use;
7. Make sure the wrench is securely fastened to the tool;
8. Use a torque wrench to apply specific levels of force;
9. Be careful not to strip the threads when using a wrench;
10. Check the tightness of the connections with a wrench.