"Calibrations" Example Sentences
1. The equipment requires regular calibrations to ensure accurate measurements.
2. The technician performed several calibrations on the machine before the experiment.
3. The team conducted extensive calibrations to ensure the sensors were working properly.
4. Without proper calibrations, the results of the experiment would be invalid.
5. The scientist adjusted the calibrations on the device to get more accurate readings.
6. The manufacturer recommends annual calibrations for their equipment.
7. The machine must undergo calibrations every time it is moved to a different location.
8. The engineer had to make adjustments to the calibrations in order to get the results he needed.
9. The technician forgot to perform the required calibrations, causing the experiment to fail.
10. The lab supervisor oversees all calibrations for the equipment in the facility.
11. The team spends hours performing complex calibrations for their research project.
12. The device was returned to the manufacturer for calibrations.
13. The technician carefully recorded all calibrations in the equipment logbook.
14. The technician calibrated the device according to the manufacturer's instructions.
15. The machine was taken offline for calibrations and maintenance.
16. The team ran several tests after completing the calibrations to ensure accuracy.
17. The device's calibrations had to be adjusted whenever the temperature changed.
18. The company requires proof of calibrations before allowing the equipment to be used on their premises.
19. The laboratory performed several calibrations on the instruments to ensure they met industry standards.
20. The calibration process ensures consistent results across different devices.
21. The calibration software can be used to automate the process and save time.
22. The scientist double-checked the calibrations before starting the experiment.
23. The technician found a problem with the equipment during the calibrations.
24. The team developed a new calibration procedure that increased the accuracy of the results.
25. The engineer spent weeks developing the calibrations for the device.
26. The device's calibrations were validated by an independent testing facility.
27. The manufacturer provides a calibration certificate with each piece of equipment.
28. The lab manager is responsible for ensuring all calibrations are up-to-date and accurate.
29. The team discovered that the calibrations were off by a small margin, but it was enough to impact the experiment.
30. The scientist used a calibration curve to determine the concentration of the sample.
Common Phases
1. The machine is undergoing
calibrations;
2. The team is conducting
calibrations on the instruments;
3. The results cannot be accurate until we complete the
calibrations;
4. The
calibrations need to be adjusted to account for the temperature changes;
5. The
calibrations are showing discrepancies in the readings;
6. We need to double-check the
calibrations before proceeding;
7. The
calibrations were done according to the manufacturer's instructions;
8. The equipment is out of order until we complete the
calibrations;
9. The laboratory technician is responsible for making
calibrations;
10. The effectiveness of the system depends on
calibrations being done regularly.