Coupler example sentences

"Coupler" Example Sentences

1. He attached the hoses using plastic couplers.
2. The two pipes were joined with a rubber coupler.
3. The coupler connected the wire to the circuit board.
4. The pipe section was joined with a compression coupler.
5. They used a quick release coupler to attach the hose.
6. The drive shaft connects to the gearbox with a torque coupler.
7. The cable connector at the end is called a coupler.
8. The universal coupler allows the shaft to flex.
9. The robotic arm was joined using shaft couplers.
10. The pipes were joined with a press fit coupler.
11. The socket wrench fit perfectly on the coupler nut.
12. The light fixtures were connected by conduit couplers.
13. The hose had a quick release coupler on the end.
14. The camshaft connects to the crankshaft with a gear coupler.
15. The two lengths of pipe were joined with a sleeve coupler.
16. The parts were attached using threaded couplers.
17. The drive shaft connects to the axle with a constant velocity coupler.
18. The wires were joined using insulated wire couplers.
19. She attached the hoses with plastic hose couplers.
20. The pole sections connect with pole couplers.
21. The cam belt connects the camshaft to the crankshaft with a toothed coupler.
22. Fluid flows through the tube fittings and into the coupler.
23. The U-bolts attach the coupler to the drive shaft.
24. The studs screw into threaded couplers.
25. The two cables connect with a cable coupler.
26. The pipes were joined using push-fit couplers.
27. The ratchet fit nicely onto the coupler nut.
28. The prop shaft connects to the gearbox with a slip coupler.
29. The pipes join using flexible rubber couplers.
30. The tubes connect to the manifold using brass couplers.
31. He turned the wrench to tighten the coupler clamp.
32. The connectors at the end of the wires are called couplers.
33. The shaft connects to the motor with a flexible coupler.
34. The mirror mounts attach to the pole with pipe couplers.
35. The hoses connect using quick disconnect couplers.
36. The half shafts connect to the gearbox using constant velocity joints or CVDs (constant velocity driveline couplers).
37. The flexible coupler absorbed minor misalignments between the shafts.
38. The motor mounts use vibration isolating rubber couplers.
39. The poles connect using extension couplers.
40. She screwed the studs into the threaded couplers.
41. The gear shaft connects to the input shaft using a gear coupler.
42. The cables connect using insulated terminal couplers.
43. The hose has a coupler on one end to connect to the fitting.
44. The telescopic tube sections connect with coupler sleeves.
45. The wires connect to the terminals with spade couplers.
46. The studs screw into the hex couplers.
47. The drive shaft connects to the clutch using a slip coupler.
48. The lengths of pipe join using a flexible coupler.
49. The water pipes connect using compression couplers.
50. The coupler ensured that the rotational speed of the two shafts remained the same.
51. The prop shaft connects to the differential using a bevel gear coupler.
52. The two cables connect using a shielded coupler.
53. The sections of tubing are joined using ferrule couplers.
54. The socket wrench fit snugly over the coupler nut.
55. She inserted the coupler into the fitting and hand tightened it.
56. The two shafts connect using a rigid coupler.
57. The conduit connects using threaded couplers.
58. The camshaft connects to the crankshaft using a gear and belt coupler.
59. The drive shaft connects to the transmission using a mechanical or hydraulic coupler.
60. The axle connects to the drive shaft using a slip coupler.

Common Phases

1. The train cars connected with a coupler.
2. He attached the hose to the coupler on the pump.
3. The electrical wires were connected with wire couplers.
4. The transmission shafts coupled together with a flexible coupler.
5. The universal joint had a rubber coupler between the two pieces.
6. She pulled the coupler pin to detach the trailer from the truck.
7. The hoses joined at the quick-connect coupler.
8. They installed a spring coupler to minimize vibrations.
9. The water pipes meet at the compression coupler.
10. You need to buy an adapter coupler to connect those two hoses.
11. The hydraulic lines coupled with a quick-release coupler.
12. The two cylinders were joined using a ball-and-socket coupler.
13. The air hose ends have a push-to-connect coupler.
14. The flexible coupler allowed some movement between shafts.
15. They fixed the broken coupler and reattached the cars.
16. The pneumatic tools used push-to-connect couplers.
17. He searched for the matching coupler to attach the hose.
18. The shafts were coupled using a jaw coupler.
19. The steam pipes joined with a Victaulic coupler.
20. The thrust bearings were held together by a spider coupler.
21. The part to connect the hoses was called a coupler head.
22. The shock absorbers used rod couplers.
23. The vacuum hose connected using a bayonet coupler.
24. They replaced the worn universal joint coupler.
25. They installed a shear coupler between the rotor and the shaft.
26. The connectors used SAE stylus couplers.
27. The tubes joined with a threaded coiled steel coupler.
28. She opened the quick coupler on the irrigation hose.
29. They fitted slip couplers onto the conveyor belt chains.
30. The lines were coupled using a camlock coupler.
31. The exhaust pipes joined with a flex coupler.
32. The rod ends had hemispherical rod couplers.
33. The hoist drum rotated on a drum coupler.
34. They fitted the constant velocity joint coupler.
35. The paddles connected to the shaft with paddle couplers.
36. The pipe connected to the fitting with an adjustable coupler.
37. The ropes joined using rope couplers.
38. The sump pump hose had a cam and groove coupler.
39. The hose joined the regulator with a metal insert coupler.
40. They needed a three-jaw mechanical coupler for the shaft.
41. They tightened the clamps on the pipe coupler.
42. The quick-connect coupler released with a push of the button.
43. The cartridge connected with a magazine coupler.
44. The pipes joined with a ferrule pipe coupler.
45. The shaft ends used keyless bush coupler.
46. The springs attached with coil spring couplers.
47. He locked the ring coupler to join the chains.
48. They fitted a jaw coupler between the drive shafts.
49. The exhaust pipe joined with a flexible muffler coupler.
50. They tightened the bolts on the flange pipe coupler.
51. The joiner pipes used coupling nuts for couplers.
52. The handles connected with shaft couplers.
53. The wires connected using insulated wire couplers.
54. The joints used ball and socket rod couplers.
55. The bolt joined the plates using a coupling nut and coupler.
56. The lights used polarized twist couplers.
57. They fitted the pump with a quick disconnect coupler.
58. The strainer connected to the hose with a threaded coupler.
59. The rods joined using a rod coupling and cotter pin coupler.
60. The belts connected using serpentine belt couplers.