Decouplers example sentences
Related (10): isolation, insulation, detachment, segregation, disconnection, division, partition, disengagement, dissociation, autonomization
"Decouplers" Example Sentences
Common Phases
1. The rockets fired and the decouplers separated the stages.
2. The launch clamps released and the decouplers fired, separating the rocket from the launchpad.
3. The shuttle decouplers unlocked allowing the orbiter to drift free from the booster rockets.
4. The pyrotechnic decouplers activated, releasing the upper stage from the lower stage.
5. The sequence of events began with the ignition of the engines followed by the release of the hold-down clamps and firing of the decouplers.
6. The payload fairing jettisoned revealing the satellite as the decouplers separated it from the upper stage.
7. The pyrotechnic ignitions triggered the decouplers to release the fairing from the rocket body.
8. The second stage burned out and decouplers separated it as the third stage started firing.
9. The spacecraft decoupled from the launch vehicle and extended its solar arrays as it began its journey to Mars.
10. The spacecraft decouplers activated and the upper stage coasted away from the second stage.
11. The engineers inspected the decouplers to ensure they would properly separate the stages during launch.
12. Scientists analyzed the performance of the decouplers to see if any improvements could be made.
13. Technicians tested the decouplers to verify they would function properly during launch.
14. Engineers modified the decouplers to improve the separation of stages during launch.
15. The pyrotechnic decouplers were connected to a series of firing circuits to activate them at the proper time.
16. The rocket decoupled from the International Space Station and fired its engines to begin its descent to Earth.
17. The clamshell fairing split open as the pyrotechnic decouplers separated it from the launch vehicle.
18. The spacecraft decoupled from the upper stage and fired its thrusters to begin the orbital checkout procedure.
19. They had to replace several of the decouplers after inspections revealed potential issues.
20. The stage separation sensors confirmed the decoupling of stages and transmitted the data to mission control.
21. The launch controllers monitored the performance of the decouplers to determine if any intervention was needed.
22. The space probe decoupled from its booster rocket and started firing its own thrusters to leave Earth orbit.
23. The secondary pyrotechnic decouplers activated, releasing the payload shroud to expose the satellite.
24. During launch preparations, technicians painstakingly connected wires to the various decouplers.
25. Once the spacecraft had decoupled from the upper stage booster, it deployed its solar panels and communication antennas.
26. The lower stage burned to depletion before its decouplers pushed the upper stage away to complete its own burn.
27. Pressure sensors confirmed proper decoupling of the upper stage by detecting the drop in pressure.
28. Dozens of nuts and bolts held the decouplers to their respective stages until ignition.
29. Engineers tested the separation sequence to verify proper timing of the various decouplers.
30. The baroswitches confirmed stage separation as the decouplers fired to detach the two stages.
31. The emergency detection system would activate the decouplers if any issues arose during ascent.
32. Telemetry data confirmed the successful decoupling and separation of all stages from the launch vehicle.
33. Technicians triple checked all connections to the sensitive decouplers prior to fueling the rocket.
34. The explosive bolts and decouplers enabled the launcher to shed unnecessary weight once their jobs were complete.
35. Aerodynamic loads built up as the decoupled stage coasted through the atmosphere.
36. The ground decouplers released the hold-down arms, allowing the rocket to ascend the launch tower.
37. The rocket's efficiency would be significantly hampered by failure of any of the decouplers.
38. The dummy fairing tested the sequence of decouplers and explosive bolts ahead of launch day.
39. Engineers inspected footage of the decouplers in action to look for any issues.
40. Descent and landing hinged greatly on the performance of the booster separation decouplers.
41. The rocket shook as multiple decouplers severed attachments between stages.
42. The payload decouplers activated, freeing the satellite from the launcher.
43. Monitors showed the nose cone dropping away as the decouplers functioned nominally.
44. Specifications for all decouplers were verified against certification documents.
45. Technicians prepared a sparing strategy for critical components like the decouplers.
46. Failure of a single decoupler could cause the entire launch to be aborted.
47. The decouplers ensured each stage only carried the weight it was designed for.
48. The clamshell nose cone opened in two halves as the decouplers fired.
49. Timing was critical for the various decouplers to activate in proper sequence.
50. The g forces of launch tested the rugged construction of the various decouplers.
51. Ground crews used simulations to verify proper functioning of all separation decouplers.
52. Redundant circuits provided backup activation of critical decouplers.
53. The fairing deployed petals as the decouplers severed attachment points.
54. The stages separated in quick succession as the decouplers functioned correctly.
55. Launch crews inspected all decouplers twice ahead of launch day.
56. The test rocket let engineers vet the design of the separation decouplers.
57. Lock wiring ensured the decouplers remained stable until the proper firing command.
58. Scrubbing of the launch provided time to recheck connections to the separation decouplers.
59. The final checks confirmed that all decouplers were safed and ready for launch.
60. The separation sequence commenced with the firing of the decouplers between stages.