Dowel example sentences

"Dowel" Example Sentences

1. The two pieces of wood were joined together with dowels.
2. He inserted dowels into the holes to reinforce the joint.
3. Dowels were used to help assemble the wooden cabinet.
4. The holes were spaced to accept the dowel pins.
5. He inserted the wooden dowels into the matching holes.
6. I used a drill press to drill precisely spaced holes for the dowels.
7. The joints were held together with wooden dowels.
8. The holes were slightly larger than the diameter of the dowels.
9. The drawer sides were attached to the front with small wooden dowels.
10. Special adhesive was applied to the dowels before insertion.
11. They used doweling joints to attach the legs to the tabletop.
12. The drawer sides were aligned before inserting the dowels.
13. The wooden handle was inserted into a dowel hole.
14. A mallet was used to tap the dowels fully into position.
15. They cut dowels to fit snugly into the corresponding holes.
16. The wooden dowels were stained to match the cabinetry.
17. The holes were predrilled at the correct dowel spacing.
18. The wooden dowels were secured with glue after insertion.
19. A liquid adhesive was applied to the ends of the dowels.
20. The legs were attached to the frame using wooden dowels and glue.
21. She measured and cut the precisely spaced dowel pins.
22. The metal pins were inserted into the predrilled dowel holes.
23. The round wooden dowels reinforced the joints of the furniture.
24. The steel dowels allowed the parts to pivot and rotate.
25. They sanded the ends of the wooden dowels to fit smoothly.
26. The dowel rods were used to help align the precut parts.
27. The assembly instructions called for plastic dowel pins.
28. The precut slots allowed the dowels to fit snugly.
29. She tested the fit of each dowel before gluing it in place.
30. The carriage bolts were secured with metal dowel nuts.
31. The wooden dowels were squeezed tightly into their holes.
32. They tapped the tapered dowels firmly into position.
33. The bamboo dowels fit perfectly into the precisely spaced holes.
34. The parts were aligned before pounding the wooden dowels into place.
35. The handrail was connected to the baluster with hollow metal dowels.
36. The round wooden dowels filled the gaps between the drawers.
37. Special clamps were used to hold the dowels in place while the glue dried.
38. The tapered metal dowels allowed the mechanism to pivot smoothly.
39. Sawdust from drilling the dowel holes was swept clean.
40. The wooden dowels joined the legs at a strong 90-degree angle.
41. The wooden dowel pins connected the rail to the stile.
42. The alignment pins ensured that the dowel holes lined up properly.
43. The square wooden dowels reinforced the corners of the frame.
44. The assembly required dowels of various lengths and thicknesses.
45. A slot was cut in the wood to accept the long dowel pin.
46. After assembly, the excess length of the dowels was trimmed off.
47. Round wooden dowels were used to reinforce the frame joints.
48. The design called for small dowels to connect the table legs.
49. They lubricated the dowels with wax before inserting them.
50. The hard maple dowels provided a strong yet attractive joinery method.
51. They tested the fit of each dowel before gluing them in place.
52. He inserted tapered metal dowels into the matching bushing holes.
53. The shelf uprights were joined to the sides using wooden dowels.
54. The predrilled holes allowed for the smooth insertion of the dowels.
55. The tapered dowels fit into their bushings with just the right amount of friction.
56. Loose dowels were secured with wooden dowel buttons.
57. A hammer and block was used to drive the dowels fully into position.
58. The hollow brass dowels allowed the table leaf to slide in and out.
59. The wooden dowels were trimmed precisely flush with the surface.
60. A hole saw was used to drill the mortise holes for the oval dowels.

Common Phrases

1. He used oak dowels to join the two boards together.
2. She inserted the dowel pins into the matching holes in the legs.
3. The dowels help stabilize and strengthen the joints.
4. The cabinetmaker used hard maple dowels in all of the carcase joints.
5. He drilled holes in the wood and inserted small metal dowels.
6. The joints held together securely thanks to the precisely cut dowels.
7. She cut all of the dowels to the required length before inserting them.
8. The metal dowels serve as pins between two connected pieces.
9. Dowels work well for connecting pieces at right angles to each other.
10. The table legs were joined using thick wooden dowels.
11. With the help of a doweling jig, she expertly marked the dowel holes.
12. The push of a trigger sent the drill bit smoothly through the wood for the dowel.
13. Screws can work in some cases, but dowels provide a stronger joint.
14. The edges were lined up perfectly by inserting the dowels.
15. The birdhouse needed small wooden dowels to connect the side-pieces.
16. He lubricated the dowels with wax before inserting them.
17. She assembled the joints slowly, inserting the dowels one at a time.
18. The unfinished furniture sat in pieces until she found the right size dowels.
19. Dowels can enhance the structural integrity of many types of woodworking projects.
20. The wooden holes were undersized for a snug fit with the dowels.
21. The dowel holes were drilled at a slight angle for a tighter fit.
22. She test-fit the dowels in the holes before gluing anything together.
23. Make sure the grain of the dowels runs parallel to the pieces they join.
24. Before using any adhesives, check that all dowels are snugly inserted.
25. Using a mallet, she tapped the wooden dowels firmly into place.
26. The thin wooden dowels splintered under the pressure.
27. He replaced the broken dowels and reinforced the joints with extra glue.
28. Special compound dowels are designed for maximum strength and durability.
29. When the glue dried, the joints held firmly together thanks to the dowels.
30. The shelf sat perfectly level because of its precisely aligned dowel pins.
31. Smooth the ends of the dowels with sandpaper before assembly.
32. She sanded the dowels flush with the surrounding surfaces after gluing.
33. The thickness of the dowels helped evenly distribute the stress.
34. All surfaces that contact the dowels must be clean and free of debris.
35. The tiny wooden dowels had to be hand-cut to the exact size needed.
36. A perfect fit between the holes and dowels ensures maximum strength.
37. There are specialized jigs available to help guide drilling the dowel holes.
38. The wooden dowels served to reinforce and align the joints between the legs.
39. He coated the ends of the dowels in glue before inserting them into the holes.
40. The precision-cut wooden dowels provided sturdy alignment for the bookcase shelves.
41. Sand any excess glue off the dowels after the joints have cured.
42. The hole saw smoothly carved perfect dowel holes through the thick wood.
43. Insert each dowel slowly and check the fit before gluing anything together.
44. The wooden dowels were a perfect fit after checking and rechecking the measurements.
45. She prevented the dowels from slipping in their holes with wooden pegs.
46. The metal dowels are used as alignment pins during the assembly process.
47. Inspect all dowel holes for debris before inserting the dowels.
48. Dowels are a simple yet effective way to reinforce many types of wood joints.
49. The structural integrity of the shelf relied on the precision of the dowel holes.
50. Woodworkers often use a mallet to seat dowels firmly into place.
51. The dowels snapped easily under stress when inserted improperly.
52. Wax the ends of the dowels for a smoother fit and easier insertion.
53. Use a vise to ensure straight drilling of holes for the metal dowel pins.
54. The machine-cut dowels provided accurate alignment for the bookcase shelves.
55. The dowels were cut at a slight angle to increase surface area in the joint.
56. She sanded the ends of the dowels to match the curvature of the holes.
57. Hardwood dowels provide more strength than their softwood counterparts.
58. The precisely measured dowel holes ensured a perfect fit for the shelf supports.
59. The angle at which the dowels meet the joint affects their holding power.
60. He coated the smooth wooden dowels in glue before tapping them into place.