Electrodes example sentences

"Electrodes" Example Sentences

1. The scientist attached the electrodes to the patient's scalp.
2. The electrodes were connected to a highly sensitive instrument.
3. The readings from the electrodes indicated that the patient was experiencing seizures.
4. The electrodes were carefully placed on the surface of the heart during the surgery.
5. The doctor used electrodes to stimulate the patient's nerves.
6. The electrodes were malfunctioning, causing the machine to give inaccurate readings.
7. The technician adjusted the electrodes to improve the signal quality.
8. The patient felt a slight tingling sensation as the electrodes were applied.
9. The electrodes recorded the electrical impulses in the muscle tissue.
10. The machine required electrodes to detect the presence of specific chemicals.
11. The electrodes were placed on either side of the brain to monitor brain activity.
12. The research team used electrodes to study the electrical properties of the material.
13. The electrodes were coated in a conductive gel to improve the signal quality.
14. The patient complained of discomfort as the electrodes were removed.
15. The electrodes were secured to the skin with adhesive patches.
16. The technician carefully adjusted the position of the electrodes to avoid interference.
17. The electrical current was applied through the electrodes to stimulate the muscle.
18. The electrodes were embedded in the electronic device to detect motion.
19. The electrodes were designed to work in extreme temperatures and conditions.
20. The patient had electrodes implanted in their brain to treat their condition.
21. The machine beeped as the electrodes were disconnected.
22. The electrodes were carefully cleaned and disinfected after use.
23. The experiment required a set of specialized electrodes.
24. The electrodes were damaged during transit and had to be replaced.
25. The patient's response to the electrodes was measured and recorded.
26. The electrodes were removed from the patient's chest after the procedure was complete.
27. The electrodes were arranged in a specific pattern to measure the electrical activity.
28. The technician carefully observed the readings from the electrodes for any abnormalities.
29. The electrodes were coated with a special material to increase their sensitivity.
30. The patient's vital signs were constantly monitored using the electrodes.

Common Phrases

1. Place the electrodes on the skin.
2. Connect the electrodes to the device.
3. Ensure the electrodes are properly positioned.
4. Apply conductive gel to the electrodes.
5. Adjust the electrode placement as needed.
6. Turn on the device and monitor the electrode readings.
7. Remove the electrodes after use.
8. Clean the electrodes with a disinfectant solution.
9. Store the electrodes in a dry and cool place.