Mandrel example sentences

"Mandrel" Example Sentences

1. The machinist used a mandrel to shape the metal.
2. The glassblower heated the glass before putting it on the mandrel.
3. The mandrel was inserted into the pipe to help it retain its shape.
4. The drill bit was secured onto the mandrel before drilling.
5. The lathe operator used a mandrel to hold the spinning material.
6. The mandrel was coated in lubricant to prevent sticking.
7. The dentist used a mandrel to smooth out the grooves in the tooth after filling it.
8. The mandrel was made of hardened steel to withstand the pressure.
9. The machinist adjusted the mandrel to fit the specifications of the piece being made.
10. The mandrel helped shape the curved edges of the steel plate.
11. The glass artist used a mandrel to make a hollow bead.
12. The mandrel was a crucial tool in creating the precision parts needed for the machine.
13. The machinist inserted a mandrel into the lathe and began turning the metal rod.
14. The mandrel allowed for precision drilling of the tiny holes in the circuit board.
15. The metal rod was secured onto the mandrel before starting the turning process.
16. The delicate glasswork required a steady hand and a reliable mandrel.
17. The mandrel was carefully crafted to ensure the piece was made to exact specifications.
18. The detailed grooves in the wood required a special mandrel to shape them.
19. The mandrel was used to hold the clay in place while the potter shaped the vase.
20. The mandrel was created specifically for the unique design of the piece being made.
21. The dentist used a mandrel to smooth out the composite filling on the tooth.
22. The glass artist attached a mandrel to a blowpipe to make a large glass sculpture.
23. The mandrel made drilling the holes in the circuit board an easier process.
24. The complex design of the project required a mandrel that could handle the intricate details.
25. The mandrel was carefully inspected to ensure it met the quality standards for the job.
26. The machine operator secured the material onto the mandrel before starting the lathe.
27. The mandrel was custom-made for the specific purpose of creating the part.
28. The mandrel was designed with a tapered shape to ease removal from the finished piece.
29. The mandrel was a valuable tool in creating the consistent shapes required for the project.
30. The machinist used a mandrel to hold the cylinder while drilling the holes for the engine.

Common Phrases

1. Place the metal tube onto the mandrel;
2. Tighten the screw to secure the mandrel in place;
3. Use a hammer to tap the mandrel into the tube;
4. Apply pressure while turning the mandrel to create a smooth bend;
5. Remove the mandrel carefully to avoid damaging the tube;
6. Clean the mandrel before using it on a new tube.