"Plywood" Example Sentences
1. The carpenter built the shelves out of plywood.
2. The table was made from veneered plywood.
3. He covered the tabletop with a sheet of smooth birch plywood.
4. They were installing blonde oak veneer plywood panels on the walls.
5. We bought sheets of inexpensive particleboard plywood for the project.
6. She covered the plywood flooring with an area rug.
7. They replaced the old rotted plywood on the deck.
8. The students used birch plywood to make workshop projects.
9. The storm damaged part of the plywood roof.
10. The sign was mounted on a sheet of marine grade plywood.
11. I cut the plywood boards to the sizes I needed.
12. They reinforced the walls with sheets of exterior grade plywood.
13. The plywood should have an exterior waterproof sealant.
14. The roof trusses were fastened down to the plywood decking.
15. The stage props were built from reinforced birch plywood.
16. They screwed the plywood panels to the wooden frame.
17. The builders installed new subflooring plywood over the joists.
18. The contractor purchased several sheets of pressure-treated plywood.
19. The cabinet boxes were constructed from birch-faced plywood.
20. The flooring was made of water-resistant underlayment plywood.
21. We nailed the plywood to the studs to form the walls.
22. The garage floor was covered in thick exterior-grade plywood.
23. We cut and measured the plywood sheets needed for the project.
24. The planks were attached to the plywood decking.
25. We screwed down the plywood sheets to join them together.
26. He stained and sealed the plywood before hanging the shelves.
27. The cabinet backs were made from half-inch plywood.
28. They reinforced the cardboard box with sheets of thin plywood.
29. The plywood flooring has started to delaminate and buckle.
30. The back porch roof is sagging and needs new plywood sheeting.
31. The plywood is warped and needs to be replaced.
32. We sanded the plywood smooth before painting.
33. The plywood decking needs to be power washed and restained.
34. The subflooring plywood has softened from moisture damage.
35. We coated the plywood with a layer of urethane for protection.
36. Plywood sheeting is inexpensive but not very durable over time.
37. The workshop benches were made from birch plywood and tubular steel.
38. The stuffed animals were constructed with plywood joint pieces.
39. He cut a plywood template to trace the shelf cutouts.
40. The plywood has started delaminating around the edges.
41. The thin plywood splintered easily when drilled or nailed.
42. The foundation needs to be screeded before laying plywood.
43. We glued and clamped the plywood pieces together before nailing.
44. The black ants had been nesting between the plywood layers.
45. The slab needs to be pressure washed before installing plywood subflooring.
46. The staircase treads were built from reinforced plywood risers.
47. We replaced the deteriorated plywood siding with new sheets.
48. The soffits were constructed of sturdy marine plywood.
49. They used plywood stringers for the porch steps.
50. The tabletop is made from 3/4-inch veneer-core plywood.
51. The sandwich wagon was built from hinged pieces of thin plywood.
52. We used a skill saw to cut curves into the plywood backing.
53. The frame was reinforced with additional horizontal plywood braces.
54. The props looked cheaply made from flimsy plywood and paint.
55. The trailer's plywood floor had soft spots from years of water damage.
56. The new plywood subflooring needed sanding between coats of polyurethane.
57. They installed plywood backing behind the sheetrock walls.
58. The replacement plywood panels were cut to fit the window frames.
59. We stained the plywood decking boards a dark cedar color.
60. The new plywood flooring needs multiple coats of marine-grade varnish.
Common Phases
1.
plywood flooring
Example: The new house had
plywood flooring until the hardwood floors were installed.
2.
plywood siding
Example: The storm damaged parts of the
plywood siding on the house.
3.
plywood decking
Example: The sun had faded the
plywood decking in the backyard.
4.
plywood sheeting
Example: They covered the walls in
plywood sheeting before installing the drywall.
5.
plywood subflooring
Example: The new hardwood flooring could not be installed until the old
plywood subflooring was replaced.
6.
plywood panels
Example: They covered the existing walls with new
plywood panels before painting.
7.
plywood backing
Example: They installed
plywood backing on the walls to hang shelves and mirrors.
8.
plywood roof
Example: The old shed had a sagging
plywood roof that needed replacement.
9.
plywood sheets
Example: They used several large
plywood sheets to build the workbenches.
10.
plywood boards
Example: The contractor purchased bundles of various size
plywood boards for the project.