Spalling example sentences

"Spalling" Example Sentences

1. Spalling occurs when the surface of concrete breaks away in patches.
2. The use of low quality concrete often leads to spalling.
3. The building's exterior suffered from spalling due to freeze-thaw cycles.
4. The spalling on the bridge was caused by excess moisture.
5. The construction team had to repair the spalling on the walls.
6. Spalling can be prevented by using high quality materials.
7. The spalling on the steps posed a safety hazard.
8. The spalling on the sidewalk made it difficult to navigate.
9. The engineer noticed spalling on the building's façade.
10. The spalling on the parking structure was a result of wear and tear.
11. Spalling is a common issue with concrete surfaces.
12. The spalling had caused cracks in the floor.
13. The building inspection revealed extensive spalling throughout the interior.
14. The spalling had to be repaired before the building could be sold.
15. Spalling can occur in any concrete structure, regardless of age.
16. The spalling on the garage wall was caused by moisture infiltration.
17. The contractor used a special mixture to prevent spalling in the new concrete.
18. Repairing spalling can be a time-consuming and costly process.
19. The spalling on the bridge needed to be patched before winter weather arrived.
20. Spalling is a sign of surface degradation and should be addressed promptly.
21. The spalling on the retaining wall was caused by water seepage.
22. Spalling can cause structural damage if left untreated.
23. The spalling on the loading dock was a result of heavy traffic.
24. The maintenance crew used a pressure washer to remove the spalling on the pavement.
25. Spalling is often a result of poor construction methods or improper maintenance.
26. The spalling on the foundation was caused by the shifting of the soil.
27. The spalling on the decorative stone was a result of exposure to the elements.
28. Preventing spalling requires proper planning and attention to detail.
29. The spalling on the pool deck needed to be repaired before the busy summer season.
30. Spalling can be prevented by applying a sealant to the surface.

Common Phrases

1. The spalling on the concrete wall was severe; we had to call a contractor to fix it.
2. Spalling occurs when water seeps into the concrete and then freezes and expands, causing the surface to flake and chip away.
3. The spalling on the brick facade gave the building a neglected and run-down appearance.
4. Repairing spalling on a building's exterior can be costly and time-consuming.
5. If left untreated, spalling can lead to further damage and potentially compromise the structural integrity of the building.