"Sparger" Example Sentences
1. The sparger was necessary for the efficient diffusion of gases into the reactor vessel.
2. The sparger plate was replaced with a more durable material to increase its lifespan.
3. The sparger system was designed to maximize oxygen transfer in the bioreactor.
4. The sparger nozzle was clogged with debris and needed cleaning.
5. The sparger assembly was disassembled for routine maintenance.
6. The sparger tube was installed to provide a continuous flow of gas into the liquid.
7. The sparger pump was turned off to prevent excess air from entering the system.
8. The sparger diffuser was adjusted to increase the bubble size and enhance mixing.
9. The sparger head was leaking and required a replacement gasket.
10. The sparger filter was added to prevent particulate matter from entering the gas stream.
11. The sparger outlet was connected to the oxygen supply line.
12. The sparger manifold was designed to evenly distribute gas flow throughout the vessel.
13. The sparger flow rate was increased to enhance the oxygenation of the reactor contents.
14. The sparger design was customized to suit the specific requirements of the process.
15. The sparger system was retrofitted with a more energy-efficient compressor.
16. The sparger installation was completed without any complications.
17. The sparger depth was adjusted to optimize gas-liquid contact.
18. The sparger location was selected to minimize the formation of dead zones.
19. The sparger plate was coated with a non-stick material to prevent fouling.
20. The sparger system was upgraded with high-performance diffusers for better gas dispersion.
21. The sparger pressure drop was measured to ensure adequate flow and mixing.
22. The sparger air flow was controlled by a precision valve for accurate dosing.
23. The sparger flow control was integrated with the control system for automatic operation.
24. The sparger oxygen transfer efficiency was calculated using mass balance equations.
25. The sparger performance was analyzed using computational fluid dynamics simulations.
26. The sparger access port was opened to inspect the internals for wear and tear.
27. The sparger bubble size distribution was characterized using image analysis techniques.
28. The sparger installation required careful alignment with other process equipment.
29. The sparger wall thickness was verified to ensure mechanical integrity.
30. The sparger nozzles were cleaned with a mild acid solution to remove mineral deposits.
Common Phases
1. The
sparger is used to introduce gas into the liquid;
2. The
sparger aids in oxygen transfer during fermentation;
3. The
sparger provides uniform mixing of gases in the bioreactor;
4. The
sparger is a crucial component in gas-liquid separation processes;
5. The
sparger can be designed to provide high mass transfer rates;
6. The
sparger improves the efficiency of gas absorption in the liquid phase;
7. The
sparger can be made from various materials such as stainless steel or ceramic;
8. The design of the
sparger depends on the specific application and operating conditions.