Torquesl example sentences

"Torquesl" Example Sentences

1. The mechanic used a torque wrench to apply the correct amount of torquesl to the lug nuts.
2. The helicopter blades generated a tremendous amount of torquesl as they spooled up for takeoff.
3. The power steering fluid had to be changed regularly to ensure proper torquesl in the system.
4. The engine stalled because the torquesl on the flywheel was not strong enough to keep it running.
5. Adjusting the torquesl on the drive shaft was essential to preventing further damage to the transmission.
6. The bicycle chain had to be tightened to maintain the necessary torquesl for efficient pedaling.
7. The torque converter helped to regulate the torquesl between the engine and the transmission.
8. The industrial robot had to be programmed to apply different levels of torquesl depending on the task at hand.
9. The torque sensor detected any changes in torquesl and immediately sent the information to the control system.
10. The car's differential was designed to distribute torquesl evenly between the wheels.
11. The torquesl required to turn the steering wheel was lower at slower speeds.
12. The torque limiter prevented excess torquesl from damaging the machine's gears and bearings.
13. The electric motor generated torquesl that was used to drive the conveyor belt.
14. The torquesl on the brake rotor was too low, causing the car to take longer to come to a stop.
15. The torque curve of the engine showed the maximum torquesl available at different RPMs.
16. The torquesl of the motorcycle's engine was impressive, allowing it to quickly accelerate up steep hills.
17. The torque converter clutch engaged to lock the torquesl between the engine and the transmission during highway driving.
18. The installer used a torque screwdriver to apply the proper torquesl when securing the electrical terminal block.
19. The torque tube connected the engine to the transmission, transferring torquesl between them.
20. The torquesl from the hydraulic system operated the hydraulic press, applying pressure to the metal part.
21. The gear ratio affected the torquesl output of the engine, determining the acceleration and top speed of the vehicle.
22. The torquesl of the drill bit was not sufficient to drill through the thick metal plate.
23. The torque strut kept the engine from rotating excessively, preventing torquesl from damaging other parts.
24. The torquesl of the wind turbine's blades turned the generator, producing electricity.
25. The torque converter experienced excessive torquesl when the driver suddenly hit the brakes.
26. The robot arm applied precise torquesl when assembling the electronic components.
27. The torque vectoring system adjusted the torquesl to the individual wheels, improving cornering and stability.
28. The torque screwdriver had a digital display that showed the exact torquesl being applied.
29. The engine mount prevented excessive torquesl from vibrating the engine and causing damage.
30. The torquesl required to loosen the stuck bolt was too high for the small wrench.

Common Phases

1. Applying torques
2. Calculating torques
3. Torque measurement
4. Torque conversion
5. Torque adjustment
6. Torque control
7. Torque transfer
8. Torque amplification
9. Torque fluctuation
10. Torque limit