Gages example sentences

"Gages" Example Sentences

1. The construction workers use gages to measure the thickness of the wall.
2. The engineer used various gages to analyze the quality of the metal.
3. He had a collection of gages for woodworking projects.
4. The mechanic used a tire pressure gage to ensure proper inflation.
5. The dentist used a dental gage to measure the depth of cavities.
6. She had to adjust the pressure gage on the gas tank to prevent explosions.
7. The meteorologist used various gages to measure the amount of precipitation.
8. The machinist used a dial gage to ensure precision in the manufacturing process.
9. The pilot checked the fuel level with a fuel gage before takeoff.
10. The metal worker used a thickness gage to ensure the material was the correct size.
11. The electrician used a wire gage to determine the correct size of wiring to use.
12. He used a humidity gage to monitor the levels in the greenhouse.
13. The surveyor used a surveying gage to measure the distance between two points.
14. The bartender used a shot gage to ensure the correct amount of alcohol was served.
15. The farmer used a rain gage to measure the rainfall for his crops.
16. The mechanic used an oil pressure gage to monitor the health of the engine.
17. The dental assistant used a bite gage to check the alignment of the patient's teeth.
18. The machine operator used a height gage to ensure consistency in the product.
19. He used a plug gage to test the size of the hole in the metal.
20. The carpenter used a scribing gage to mark the outlines of the wood.
21. The jeweler used a ring gage to measure the size of the customer's finger.
22. The electrician used a voltage gage to measure the electrical potential in the circuit.
23. The scientist used a pH gage to measure the acidity of the solution.
24. The welder used a butt-welding gage to ensure the accuracy of the seam.
25. The painter used a viscosity gage to determine the thickness of the paint.
26. The metallurgist used a microstructure gage to analyze the composition of the metal.
27. The automotive technician used a compression gage to test the pressure in the engine.
28. The tailor used a spacing gage to ensure proper spacing of the stitching.
29. The plumber used a faucets gage to ensure correct installation of the faucets.
30. The geologist used a pressure gage to measure the stress in the rock formation.

Common Phases

1. "Take the gages out of the box";
2. "Calibrate the gages for accuracy";
3. "Attach the gages to the testing equipment";
4. "Measure the pressure using the gages";
5. "Record the readings from the gages";
6. "Remove the gages from the equipment";
7. "Clean and store the gages properly".