"Grindability" Example Sentences
1. The grindability of the ore sample was tested in the laboratory.
2. The grindability index is a measure of how easily a material can be ground.
3. The grindability of the feed material is a critical factor in determining the efficiency of the milling process.
4. The low grindability of the coal resulted in poor mill performance.
5. The grindability of the mineral was found to be higher than expected.
6. The grindability test was performed using a ball mill.
7. The grindability parameter was used to calculate the energy required for grinding.
8. The grindability of the raw material affects the quality of the final product.
9. The grindability of the rock sample was determined by measuring the amount of energy required to grind it.
10. The high grindability of the material made it ideal for use in the cement industry.
11. The grindability analysis showed that the sample was suitable for processing in a vertical roller mill.
12. The grindability test results were used to optimize the grinding process.
13. The grindability of the ore affects the selection of the most appropriate grinding equipment.
14. The grindability of the coal was found to be lower than the industry standard.
15. The grindability of the material was improved by adding a grinding aid.
16. The grindability of the sample was determined using a standard test method.
17. The difficulty of grinding the material was attributed to its low grindability.
18. The grindability of the clinker was measured using a standard laboratory test.
19. The grindability of the limestone was found to be highly dependent on its mineral composition.
20. The grindability of the material can be improved by changing its particle size distribution.
21. The grindability of the abrasive material was determined using a diamond indicator.
22. The grindability of the feed stock was found to be a critical factor in the performance of the beneficiation process.
23. The low grindability of the material made it difficult to achieve the desired particle size distribution.
24. The optimal grindability parameters were determined by statistical analysis of the experimental data.
25. The grindability of the material was found to be highly dependent on its moisture content.
26. The grindability of the rock was determined by measuring the energy required to reduce its particle size.
27. The grindability of the material was increased by subjecting it to high-pressure grinding rolls.
28. The grindability of the ore was found to be strongly correlated with its mineralogy.
29. The grindability of the cement was optimized by adjusting the fineness and composition of the clinker.
30. The low grindability of the raw material was compensated for by increasing the mill speed.
Common Phases
1. The
grindability of the material has been a topic of debate among researchers;
2. The grinding process is affected by the
grindability of the material;
3. The
grindability test results showed that the material is suitable for fine grinding;
4. Variations in the
grindability of different coal types can impact their combustion performance;
5. The ore's
grindability affects the efficiency of the milling process;
6. A high
grindability index implies that the material can be ground to a fine powder easily.