"Pitots" Example Sentences
1. The pitots on the aircraft were checked before takeoff.
2. The pitots were clogged with ice, affecting the plane's airspeed readings.
3. The plane's pitots were being regularly maintained to prevent any malfunctions.
4. The crash investigators found damage on the pitot tubes during the wreckage examination.
5. The pilots were instructed to clear the pitots after landing to prevent any buildup.
6. The pitots need to be calibrated periodically to ensure accurate readings.
7. The pitots on the plane were vulnerable to damage from hailstorms.
8. The pitots were inspected before the flight and found to be functioning properly.
9. The aircraft had several backup pitots in case the primary ones failed.
10. The plane's pitots were upgraded to digital ones to improve precision.
11. A malfunctioning pitot caused the plane's airspeed indicators to fail.
12. The pitot heads were carefully cleaned to prevent contamination.
13. The pitots were covered during the aircraft's storage to prevent debris from entering.
14. The pitots were located on the bottom of the aircraft's nose cone.
15. The pitots are essential instruments for measuring an aircraft's airspeed.
16. The faulty pitot was replaced during the plane's routine maintenance check.
17. The pitots were corroded and needed to be replaced immediately.
18. The pitot heater prevented ice from forming inside the instrument.
19. The pilots were trained to recognize pitot malfunction indicators and respond accordingly.
20. The air traffic control tower alerted the pilots of a possible pitot malfunction.
21. The pitots were tested in various atmospheric conditions to assure their reliability.
22. The pitots were damaged during the thunderstorm, causing flight delays.
23. The pitots were removed for a thorough inspective during an overhaul of the aircraft.
24. The pitots were designed to measure both airspeed and altitude.
25. The pitot's output was being used by the aircraft's computer for the automatic landing system.
26. The pitots were calibrated differently for different types of aircraft.
27. The pitots were made of stainless steel for their durability.
28. The pitots were malfunctioning due to a wiring issue, which was resolved before flight.
29. The pilots were trained to report any pitot malfunctions immediately to the maintenance crew.
30. The aircraft's manufacturer provided detailed instructions on how to maintain the pitots.
Common Phases
1. The
pitots were clogged; the airplane could not measure airspeed accurately.
2. The pilot inserted the pitot tube into the groove; it was ready for take-off.
3. The mechanic checked the pitot system for leaks; there were none found.
4. The pitot-static system failed mid-flight; the crew had to rely on other instruments.
5. The pitot cover was still on the plane; it couldn't take off until it was removed.