"Swage" Example Sentences
1. The blacksmith used a swage to shape the metal rod.
2. The swage tool was too dull to make precise cuts.
3. The machinist adjusted the swage block for accuracy.
4. The sheet metal worker used a swage machine to create the desired shape.
5. The swage fitting was not compatible with the hose.
6. The plumber needed to crimp the swage fitting to prevent leaks.
7. The carpenter used a swage gauge to measure the size of the hole.
8. The swage punch broke after excessive use.
9. The swage nipple was threaded on both ends.
10. The electrician used a swage sleeve to connect the wires.
11. The fencing contractor used a swageless terminal to secure the wire rope.
12. The framer used a swage eye to connect the cables to the turnbuckles.
13. The blacksmith heated the swage tool to prevent it from cracking.
14. The swage block had different-sized holes for various shaping needs.
15. The sheet metal worker had to swage the edges to prevent sharp edges.
16. The plumber used a swage fitting to connect two pipes together.
17. The machinist used a custom-made swage tool for a unique metal shaping project.
18. The swage tool was made of durable steel for longer use.
19. The electrician used a swage stud to securely connect the wires.
20. The fencing contractor used a swage terminal to tighten the cable.
21. The swage block had a smooth surface for an optimal shaping experience.
22. The framer used a swage hook to connect the cables to the anchor points.
23. The blacksmith used a swage bench to rest his tools while working.
24. The sheet metal worker used a swage machine to create intricate designs.
25. The plumber needed to swage the fitting before connecting the pipes.
26. The machinist used a swage plate to position the metal before shaping.
27. The swage tool had a non-slip grip for better control.
28. The electrician used a swage ferrule to connect the wires to the terminal.
29. The fencing contractor used a swageless stud to adjust the cable length.
30. The framer used a swage turnbuckle to tighten the cables for stability.
Common Phases
1. The mechanic used a
swage to crimp the fitting onto the hose;
2. The metalworker used a
swage block to shape the metal into the desired form;
3. The plumber used a
swage tool to expand the pipe for a better fit;
4. The cable technician used a
swage sleeve to connect the two cables together;
5. The jeweler used a
swage punch to create intricate designs on the metal.