Clamps example sentences

"Clamps" Example Sentences

1. The mechanic tightened the clamps on the car's radiator.
2. The construction worker secured the metal beams using clamps.
3. Sheila used clamps to hold the fabric in place while sewing.
4. The dental assistant placed clamps on the patient's teeth for a filling procedure.
5. The carpenter fastened the wood pieces together with clamps.
6. The metalworker shaped the piece of metal with clamps and a hammer.
7. The artist used clamps to hold the canvas in place while painting.
8. The plumber used clamps to connect the pipes together.
9. The hobbyist used clamps to hold the model airplane parts while assembling.
10. The cyclist tightened the clamps on his bike's handlebars.
11. The farmer used clamps to secure the fence posts in place.
12. The sound technician clamped the microphone stand to the stage floor.
13. The welder secured the metal pieces together with clamps before welding.
14. The sculptor used clamps to hold the clay in place while sculpting.
15. The paver used clamps to hold the bricks in place while laying a pathway.
16. The electrician used clamps to connect the wires to the circuit box.
17. The upholsterer used clamps to hold the fabric in place while stapling.
18. The machinist used clamps to secure the object to the lathe.
19. The blacksmith hammered the metal piece into shape on the clamps.
20. The aircraft mechanic used clamps to fasten the engine to the plane.
21. The glassblower used clamps to hold the hot glass while shaping it.
22. The boat builder used clamps to secure the pieces of wood together.
23. The model train enthusiast used clamps to hold the tracks in place.
24. The metal fabricator used clamps to join the pieces of metal together.
25. The jewelry maker used clamps to hold the wire in place while shaping it.
26. The sculptor used clamps to hold the stone in place while carving.
27. The electrician used clamps to hold the conduit in place while attaching wires.
28. The construction worker used clamps to hold the scaffolding together.
29. The woodcarver used clamps to secure the wood to the workbench.
30. The metalworker used clamps to hold the metal piece in place while cutting it.

Common Phases

1. Tighten the clamps securely;
2. Adjust the clamps until they are in the correct position;
3. Release the clamps slowly;
4. Be careful not to damage the object with the clamps;
5. Use two clamps to ensure a tight fit;
6. Check the clamps regularly for signs of wear;
7. Make sure the clamps are properly aligned;
8. Apply pressure evenly across all of the clamps.