Stoppering example sentences

"Stoppering" Example Sentences

1. The chemist was stoppering the vial of acid.
2. She carefully stoppered the perfume bottle.
3. He accidentally dropped the stopper while stoppering the flask.
4. The wine bottle was securely stoppered to prevent any spillage.
5. The stoppering process was halted due to a power outage.
6. The rubber stoppering was not tight enough, causing leakage.
7. They had to switch to a different stoppering machine as the previous one was faulty.
8. The technician inspected the stoppering quality of the vials before they were packed.
9. The glassblower created a custom stopper for the decanter.
10. The stoppering procedure was not completed correctly, leading to contamination.
11. The stopper on the test tube was too tight, making it difficult to open.
12. The cork stopper was too old and brittle, so it had to be replaced.
13. The laboratory assistant used forceps to place the stopper onto the flask.
14. The stopper fell out of the flask, causing the experiment to fail.
15. They had to stopper the beakers before proceeding to the next step of the experiment.
16. The stoppered acid solution was used for the titration.
17. The stopper had to be sterilized before being used in the laboratory.
18. The stoppering equipment needed to be calibrated for precision.
19. The stopper had a unique shape that prevented it from being misplaced.
20. The stoppering process had to be paused while the technician fixed the machinery.
21. The laboratory recommended using a specific type of stopper for the test tubes.
22. The cork stopper was difficult to insert, but once in, it was tightly secured.
23. The glass vial had a fragile stopper that required careful handling.
24. The stopper on the syringe prevented any air from entering the system.
25. The stopper was easily replaceable as it had a standardized size and shape.
26. The rubber stopper was gradually inserted into the test tube to avoid damage.
27. The acid was stored in a stoppered glass container in the chemical lab.
28. The stoppering process was carried out in a sterile environment to prevent contamination.
29. The stopper was coated with a layer of silicone to ensure a tight seal.
30. The experiment had to be repeated as the stopper was not securely fastened.